WATER-BASED EPOXY ENAMEL AQ-N 10

Name: WATER-BASED EPOXY ENAMEL AQ-N 10
SKU: 2954
Availability: InStock

High-quality paint made with epoxy resins in aqueous dispersion. Good mechanical and chemical resistance. It adheres to almost all types of surfaces and can be applied even on wet plaster or concrete. It does not release solvents or toxic products when applied or once dry.

Application
Indoor and outdoor. Plaster, wet concrete, food handling facilities, warehouses, hospitals, abattoirs

Drying time
7 hours

Performance
4 - 6 m2/l

SKU: N/A Categories: 2 Components, Enamels Tags: ADHESION, INALTERABILITY TO CHEMICAL AGENTS

Due to its innocuousness, it is suitable for installations where food is handled, such as food factories or warehouses, wineries, etc., as well as hospitals, slaughterhouses or poorly ventilated premises where a paint that does not release toxic products when applied or once dry is required.

Due to its mechanical resistance, it is also recommended for floors subjected to abrasion, such as garages, warehouses, etc.

Product without organic solvents. Suitable for premises where food is handled.

The curing process depends especially on the temperature (it’s done very slowly with low temperatures or relatively high humidity).
It reaches its maximum properties 10 days after application (20-25%).
For a correct mixing ratio, empty the content of component B into the pot of component A and shake for 5 minutes. Do not make partial mixtures – the properties of the product can be varied and affect its properties (hardness, drying, etc.).
On non-porous surfaces, it’s best to apply a coat of epoxy fixative beforehand to promote adhesion.

Avoid inhalation, ingestion and contact with skin and eyes.
If applied using a gun, do so in ventilated rooms and use adequate respiratory protection for organic vapours.
Keep out of reach of children.
Flammable. Avoid heat sources.
For more information, see the safety information sheet.